5
(2)

Pool Fence Regulations In Queensland

 

Pool Fence Regulations In QueenslandIn the wake of the need for safety and surveillance in the swimming areas, pool fence regulations in Queensland were put in place as part of the pool safety requirements. Deaths in swimming pools as well as serious immersion injuries have been part of the Queensland safety data for quite a while as children especially those below 5 years of age were increasingly being susceptible to these safety concerns. Existing and new pools whether shared or private are required to comply with the pool safety requirements in Queensland. 

 

What it Takes to Meet the Pool Fence Regulations in Queensland

 

If you are a landlord, agent, or property owner and you want your pool to comply with the Queensland pool safety regulations, the beginning point is to have an inspection done by a qualified and licensed pool fence inspector in Queensland. 

These experts who may be individuals or companies are licensed by the government under the Queensland Building and Construction Commission. The pool safety inspector does the following:

• A detailed physical inspection of your pool to determine its conformity with the safety standard.

• Issuing of pool safety certificates in the event your swimming pool is found compliant 

• Issuing of non-conformity notices should your pool be found to be in violation of the safety requirements 

• Can carry out where licenced to do so minor works in line with the state swimming pool fence regulations so as to bring the pool into full compliance. 

What the process will entail, the fees required and the timing of the inspection is a subject of negotiation between you, the pool owner, and the inspector. 

 

The Requirements under the Pool Fence Regulations in Queensland

 

Under the pool safety laws, fencing includes the barrier around the pool area as well as the non-climbable zone around it. There are specific areas inspectors look at to determine the extent to which your pool complies with the safety standard. Below are the main areas of concern:

 

Fencing

 

This is the critical component examined under the pool fence regulations in Queensland. The requirements outline the following points to be considered in pool fencing. 

• From the finished ground level all the way to the topmost point of your pool barrier should measure a minimum of 1200 mm. 

• The maximum possible allowable gap between the bottom of the pool barrier and the finished ground level should be 100 mm. 

• In the event your horizontal rails are positioned 900 mm apart or less, your vertical pool fencing members such as wires, palings, and rods should be positioned within 10 mm or less.

 

Non-Climbable Zone

 

pool fence regulations in Queensland

As part of the pool fence regulations in Queensland, there is a requirement for pool owners to provide a non-climbable zone all around the pool area. This zone is important as part of the safety measures to prevent children from climbing the pool barrier or making use of climbable objects to access the pool. The following are the requirements for the non-climbable zone.

• The zone should be 900 mm from the pool barrier all-round the pool facility. 

• For pool fences that measure a height of less than 1800 mm, the non-climbable zone should be located on the outside. For pool fences that have a height of 1800 mm and above, the zone can either be located on the outside or inside of the pool fence. 

• Objects such as outdoor furniture, projections, retaining walls, and pot plants with a horizontal surface exceeding 10 mm must be removed from the non-climbable zone. This eliminates chances of children gaining a foot or a handhold to access the pool area. 

 

Gates and Latches

 

Gates must not open towards the swimming pool area and must also be self-closing and self-latching. In the case of gate latches, they should be located 1500 mm above the ground level on the minimum. 

 

Cardiopulmonary Resuscitation Signs

 

As per the pool fence regulations in Queensland, these signs must be located near the pool, in a conspicuous position, and contain clear statements of the steps to be taken in case of emergencies. 

If your pool doesn’t conform with the pool fence regulations in Queensland, you have an option of doing the rectifications yourself, hiring a maintenance person, or better still look for a contractor who is qualified by the Queensland Building and Construction Commission to work on pool barriers. After your pool fencing has been rectified, you can notify the pool inspector who will come and re-inspect the barrier again and if it is found to be compliant, you will be issued with a pool safety certificate. 

Compliance with pool fence regulations in Queensland is for your own safety and that of your family as well as part of your legal obligation.

How useful was this post?

Click on a star to rate it!

Average rating 5 / 5. Vote count: 2

No votes so far! Be the first to rate this post.

© 2020 All Rights Reserved.