Compliance made easy with Brisbane Barrier Fences

5
(1)

Brisbane Barrier FencesAs a pool owner in Queensland, you must comply with the Brisbane Barrier Fences Regulations that stipulate minimum standards for pool barriers. The primary purpose of these regulations is to reduce the incidence of children drowning and suffering serious immersion injuries.

Elite Pool Inspections is Your Expert in Brisbane

Elite Pool Inspections is your Brisbane Barrier Fences expert and can help you ensure compliance with the regulations. We can provide you with a comprehensive report detailing any areas of non-compliance and recommend solutions to rectify the situation. We can also offer advice on the best type of fence for your pool.

 

Don’t Risk It

Don’t risk being fined or, worse, putting your family’s safety at risk – contact Elite Pool Inspections Today and let us help you comply with the Brisbane Barrier Fences regulations.

Elite Pool Inspections is your Brisbane pool safety inspector that can help you determine whether your Brisbane pool meets the required standards. We will conduct a thorough assessment of your pool area and provide you with a report outlining any areas that do not meet the Brisbane Barrier Fences Regulations.

 

Some of the Key Areas Pool Inspectors Look At

There are several key areas that we will look at during our inspection. Some of these include:

Minimum NCZ

Non-climbable zones (NCZ): This area around the pool fence must be free of objects or structures that could be used to climb the fence. The minimum width of the NCZ must be 900mm.

– Height and strength of barriers: Brisbane Barrier Fences Regulations stipulate that pool fences must be at least 1200mm high and made from materials that cannot be easily climbed or broken through.

– Accessibility to pool areas: All doors and windows that provide access to the pool area must be fitted with an approved child-resistant safety device. This could include a self-closing, self-latching gate.

– Gates and latches: Brisbane Barrier Fences Regulations stipulate that all gates providing access to the pool area must be equipped with a latch at least 1500mm above ground level. The latch must also be designed so that a child cannot easily open it.

 

Competitive Prices

If you have any questions about Brisbane Barrier Fences Regulations or would like to schedule an inspection, don’t hesitate to get in touch with Elite Pool Inspections Today. We offer competitive rates and can provide you with peace of mind knowing that your pool is compliant with Brisbane Barrier Fences Regulations.

 

We Give You a Detailed Pool Inspection Report

Brisbane Barrier Fences experts can help you ensure compliance with the regulations. We can provide you with a comprehensive report detailing any areas of non-compliance and recommend solutions to rectify the situation.

Don’t risk being fined or, worse, putting your family’s safety at risk – contact Elite Pool Inspections Today and let us help you comply with the Brisbane Barrier Fences regulations.

 

Brisbane Barrier Fences ExpertBarrier Fences Brisbane

Elite Pool Inspections is your Brisbane barrier fences expert specialising in pool safety fences. They are very familiar with the benchmark metrics stipulated by the pool safety standard. According to Brisbane Barrier Fences, the minimum distance in height from the ground level to the very top of the pool barrier should be 1200 mm.

 

Additionally, the maximum possible gap allowed under the swimming pool fence regulations from the bottom of any barrier to the finished ground level is 100 mm.

In cases where the horizontal rails are 900 mm apart on the minimum, Brisbane Barrier Fences states that the gaps in the vertical structures must not be more than 100 mm. However, if the horizontal rails measure less than 900 mm apart, Brisbane Barrier Fences says that the gaps in vertical structures can’t exceed 10 mm apart. Ultimately, Brisbane Barrier Fences is a reliable source of information on pool safety fencing standards.

 

Brisbane Barrier Fences Gates

Brisbane Barrier Fences is the leading provider of pool fences in Brisbane. We strictly adhere to the pool safety standards and ensure that all our products comply with the regulations.

 

Pool Fence Regulations

The gates leading to your pool area must meet the minimum threshold as indicated in the pool safety standard. According to Pool Fence Regulations In QLD, your pool gates must be self-closing, not open inwards to the swimming pool area, and self-latching from all possible positions.

 

Pool Gate Standards

Any latches fixed on the gate must be positioned not lower than 1500 mm in height from the ground level and should be at least 1400 mm from the topmost part of the lowest horizontal railings. Pool gate hinges thicker than 10 mm must be positioned 900 mm apart on the minimum.

 

Contact us today

With Brisbane Barrier Fences, you can ensure that you are getting the highest quality service that adheres to all the safety standards. Call us today to inspect your Brisbane Barrier Fences on 0438 617 917

How useful was this post?

Click on a star to rate it!

Average rating 5 / 5. Vote count: 1

No votes so far! Be the first to rate this post.